motion control stepper motor drive - SD218 - CAN open = 5AShow more characteristics >
Main range of productLexium SD2 product or component typeMotion stepper drive device short nameSD218 communication interfaceCANopen Complementary network number of phasesSingle phase [Us] rated supply voltage24...48 V supply voltage typeDC supply voltage limits12…48 V maximum motor phase current5 A current consumption<= 4 mA voltage state 0 guaranteed0...0.8 V for general purpose I/O defined as inputs voltage state 1 guaranteed2.2...24 V input current1.75 mA - high level for general purpose I/O defined as inputs output current600 mA - single channel, duty cycle = 0.8 for general purpose I/O defined as outputs275 mA - four channels, continuous for general purpose I/O defined as outputs input voltage0...24 V for general purpose I/O defined as inputs residual ripple2 V at nominal voltage electrical connection1 connector wire crimp 4 pins for motor interface1 connector wire crimp 2 pins for supply voltage1 connector DB9 for fieldbus for CANopen interface1 connector wire crimp 14 pins for multifunction interface transmission rate10, 20, 50, 100, 125, 250, 800, 1000 kbauds type of coolingConvection width76 mm height54 mm depth99 mm markingCE net weight0.34 kg Environment electromagnetic compatibilityElectrostatic discharge conforming to EN/IEC 61000-4-2Immunity to radiated radio-electrical interference conforming to EN/IEC 61000-4-3Immunity to electrical transients conforming to EN/IEC 61000-4-4Voltage/current impulse conforming to EN/IEC 61000-4-5Immunity to voltage dips conforming to EN/IEC 61000-4-11Immunity to conducted RF disturbances conforming to EN/IEC 61000-4-6 standardsEN 55011 group 1 class AEN 61000-3-2EN 61000-3-3 ambient air temperature for operation0…50 °C without with flange motor mounted on a steel plate 300 x 300 x 10 mm50…65 °C with power derating of 2.2 % per °C with flange motor mounted on a steel plate 300 x 300 x 10 mm ambient air temperature for storage-25…70 °C relative humidity15…85 % without condensation operating altitude<= 1000 m without IP degree of protectionIP20 Offer Sustainability EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
Documents and DownloadsLanguage
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)M3.5 screws for flat mount.(2)M4 screws for end mount.