TeSys D reversing contactor - 3P(3 NO) - AC-3 - <= 440 V 95 A - 230 V AC coilShow more characteristics >
Main rangeTeSys product nameTeSys D product or component typeReversing contactor device short nameLC2D contactor applicationResistive loadMotor control utilisation categoryAC-1AC-3 device presentationPreassembled with reversing power busbar poles description3P power pole contact composition3 NO [Ue] rated operational voltagePower circuit: <= 1000 V AC 25...400 HzPower circuit: <= 300 V DC [Ie] rated operational current125 A (at <60 °C) at <= 440 V AC AC-1 for power circuit95 A (at <60 °C) at <= 440 V AC AC-3 for power circuit motor power kW45 kW at 415...440 V AC 50 Hz55 kW at 500 V AC 50 Hz45 kW at 660...690 V AC 50 Hz45 kW at 1000 V AC 50 Hz25 kW at 220...230 V AC 50 Hz45 kW at 380...400 V AC 50 Hz motor power HP (UL / CSA)20 hp at 200/208 V AC 60 Hz for 3 phases motors7.5 hp at 115 V AC 60 Hz for 1 phase motors15 hp at 230/240 V AC 60 Hz for 1 phase motors25 hp at 230/240 V AC 60 Hz for 3 phases motors60 hp at 460/480 V AC 60 Hz for 3 phases motors60 hp at 575/600 V AC 60 Hz for 3 phases motors control circuit typeAC at 50/60 Hz [Uc] control circuit voltage230 V AC 50/60 Hz auxiliary contact composition1 NO + 1 NC [Uimp] rated impulse withstand voltage8 kV conforming to IEC 60947 overvoltage categoryIII [Ith] conventional free air thermal current10 A (at 60 °C) for signalling circuit125 A (at 60 °C) for power circuit Irms rated making capacity140 A AC for signalling circuit conforming to IEC 60947-5-1250 A DC for signalling circuit conforming to IEC 60947-5-11100 A at 440 V for power circuit conforming to IEC 60947 rated breaking capacity1100 A at 440 V for power circuit conforming to IEC 60947 [Icw] rated short-time withstand current135 A 40 °C - 10 min for power circuit400 A 40 °C - 1 min for power circuit800 A 40 °C - 10 s for power circuit1100 A 40 °C - 1 s for power circuit100 A - 1 s for signalling circuit120 A - 500 ms for signalling circuit140 A - 100 ms for signalling circuit associated fuse rating10 A gG for signalling circuit conforming to IEC 60947-5-1200 A gG at <= 690 V coordination type 1 for power circuit160 A gG at <= 690 V coordination type 2 for power circuit average impedance0.8 mOhm - Ith 125 A 50 Hz for power circuit [Ui] rated insulation voltagePower circuit: 600 V CSA certifiedPower circuit: 600 V UL certifiedSignalling circuit: 690 V conforming to IEC 60947-1Signalling circuit: 600 V CSA certifiedSignalling circuit: 600 V UL certifiedPower circuit: 1000 V conforming to IEC 60947-4-1 electrical durability1.2 Mcycles 95 A AC-3 at Ue <= 440 V1.3 Mcycles 125 A AC-1 at Ue <= 440 V power dissipation per pole12.5 W AC-17.2 W AC-3 safety coverWith interlocking typeMechanical mounting supportRailPlate standardsCSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508 product certificationsDNVGOSTGLLROS (Lloyds register of shipping)BVCCCRINA connections - terminalsControl circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable endControl circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable endControl circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable endControl circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable endControl circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable endControl circuit: screw clamp terminals 1 cable(s) 1…2.5 mm²flexible with cable endPower circuit: connector 1 cable(s) 4…50 mm²flexible without cable endPower circuit: connector 2 cable(s) 4…25 mm²flexible without cable endPower circuit: connector 1 cable(s) 4…50 mm²flexible with cable endPower circuit: connector 2 cable(s) 4…16 mm²flexible with cable endPower circuit: connector 1 cable(s) 4…50 mm²solid without cable endPower circuit: connector 2 cable(s) 4…25 mm²solid without cable end tightening torqueControl circuit: 1.2 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mmControl circuit: 1.2 N.m - on screw clamp terminals - with screwdriver Philips No 2Power circuit: 9 N.m - on connector - with screwdriver flat Ø 6 to Ø 8 mmPower circuit: 9 N.m - on connector hexagonal screw head 4 mm operating time20...35 ms closing6...20 ms opening safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 mechanical durability4 Mcycles maximum operating rate3600 cyc/h 60 °C Complementary coil technologyWithout built-in suppressor module control circuit voltage limitsDrop-out: 0.3...0.6 Uc AC 50/60 Hz (at 55 °C)Operational: 0.8...1.1 Uc AC 50 Hz (at 55 °C)Operational: 0.85...1.1 Uc AC 60 Hz (at 55 °C) inrush power in VA245 VA 60 Hz cos phi 0.75 (at 20 °C)245 VA 50 Hz cos phi 0.75 (at 20 °C) hold-in power consumption in VA26 VA 60 Hz cos phi 0.3 (at 20 °C)26 VA 50 Hz cos phi 0.3 (at 20 °C) heat dissipation6…10 W at 50/60 Hz auxiliary contacts typetype mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 type mirror contact 1 NC conforming to IEC 60947-4-1 signalling circuit frequency25...400 Hz minimum switching current5 mA for signalling circuit minimum switching voltage17 V for signalling circuit non-overlap time1.5 ms on de-energisation between NC and NO contact1.5 ms on energisation between NC and NO contact insulation resistance> 10 MOhm for signalling circuit Environment IP degree of protectionIP20 front face conforming to IEC 60529 protective treatmentTH conforming to IEC 60068-2-30 pollution degree3 ambient air temperature for operation-5…60 °C ambient air temperature for storage-60…80 °C permissible ambient air temperature around the device-40…70 °C at Uc operating altitude3000 m without fire resistance850 °C conforming to IEC 60695-2-1 flame retardanceV1 conforming to UL 94 mechanical robustnessVibrations contactor open: 2 Gn, 5...300 HzShocks contactor open: 8 Gn for 11 msVibrations contactor closed: 3 Gn, 5...300 HzShocks contactor closed: 10 Gn for 11 ms height127 mm width182 mm depth158 mm product weight3.2 kg Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity ProfileNo need of specific recycling operations WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
Documents and DownloadsLanguage
CatalogueSizeAdd to My DocumentsTeSys catalogue - 2019 - 2020 - chapter B8 contactors TeSys SK,K, D, SKGC, GC, GY,GF (Version 7.0)Tesys catalogue 2019 - 2020 Motor control and protection components (Version 9.2)Instruction sheetSizeAdd to My DocumentsCertificateSizeAdd to My DocumentsDeclaration of conformitySizeAdd to My DocumentsProduct Environmental ProfileSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
LC2 or 2 x LC1
D80 and D95 (AC)
c, e1 and e2: including cabling.
Connections and SchemaWiring