soft starter for asynchronous motor - ATS01 - 72 A - 400 V - 37 KWShow more characteristics >
Main range of productAltistart 01 product or component typeSoft starter product destinationAsynchronous motors product specific applicationSimple machine device short nameATS01 network number of phases3 phases [Us] rated supply voltage400 V - 15...10 % motor power kW37 kW, 3 phases at 400 V motor power hp40 hp, 3 phases at 400 V IcL starter rating72 A utilisation categoryAC-53B conforming to EN/IEC 60947-4-2 current consumption216 A at nominal load type of startStart with voltage ramp power dissipation in W23 W at full load and at end of starting436 W in transient state Complementary assembly styleWith heat sink function availableIntegrated bypass supply voltage limits340…440 V supply frequency50...60 Hz - 5...5 % network frequency47.5...63 Hz output voltage<= power supply voltage [Uc] control circuit voltageBuilt into the starter starting time1 s / 36012 s / 30Adjustable from 1 to 25 s deceleration time symbAdjustable from 1 to 25 s starting torque30...80 % of starting torque of motor connected directly on the line supply discrete input typeInternal (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA discrete input voltage24 V discrete input logicPositive logic LI1, LI2, BOOST at State 0: <= 3 V at State 1: >= 10 V discrete output current2 A DC-133 A AC-15 discrete output typeRelay outputs R1A, R1C discrete output voltage24 V DCrelay outputs250 V ACrelay outputs minimum switching current10 mA at 17 V DC for relay outputs display type1 LED (green) for starter powered up1 LED (yellow) for nominal voltage reached tightening torque0.7 N.m5 N.m electrical connectionEarth connection: tinned connector fixed using Ø 6 mm screws4 mm screw clamp terminal - rigid 1 6...35 mm² power circuitScrew connector - rigid 1 0.75...1.5 mm² control circuit4 mm screw clamp terminal - rigid 2 6...25 mm² power circuitScrew connector - rigid 2 0.75...1.5 mm² control circuit4 mm screw clamp terminal - flexible with cable end 1 4...25 mm² power circuitScrew connector - flexible with cable end 1 0.75...1.5 mm² control circuit4 mm screw clamp terminal - flexible without cable end 1 6...25 mm² power circuitScrew connector - flexible without cable end 1 0.75...1.5 mm² control circuit4 mm screw clamp terminal - flexible with cable end 2 4...16 mm² power circuitScrew connector - flexible with cable end 2 0.75...1.5 mm² control circuit4 mm screw clamp terminal - flexible without cable end 2 6...25 mm² power circuitScrew connector - flexible without cable end 2 0.75...1.5 mm² control circuit markingCE operating positionVertical +/- 10 degree height146 mm width180 mm depth126 mm net weight3.8 kg compatibility codeATS01N2 Environment electromagnetic compatibilityConducted and radiated emissions level B conforming to IEC 60947-4-2Damped oscillating waves level 3 conforming to IEC 61000-4-12Electrostatic discharge level 3 conforming to IEC 61000-4-2EMC immunity conforming to EN 50082-1EMC immunity conforming to EN 50082-2Harmonics conforming to IEC 1000-3-2Harmonics conforming to IEC 1000-3-4Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6Immunity to electrical transients level 4 conforming to IEC 61000-4-4Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11Voltage/current impulse level 3 conforming to IEC 61000-4-5 standardsEN/IEC 60947-4-2 product certificationsB44.1-96/ASME A17.5 for starter wired to the motor delta terminalGOSTCSACCCC-TickUL IP degree of protectionOn front panel: IP20 pollution degree3 conforming to IEC 60664-13 conforming to UL 508 vibration resistance2 gn shock resistance8 gn for 11 ms conforming to EN/IEC 60068-2-27 relative humidity5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 ambient air temperature for operation0…55 °C ambient air temperature for storage-25…70 °C conforming to EN/IEC 60947-4-2 operating altitude<= 2000 m without> 2000 m with current derating of 0.5 % per additional 100 m Contractual warranty Warranty18 months
Documents and DownloadsInstruction sheetSizeAdd to My DocumentsCADSizeAdd to My DocumentsSoft start/soft stop unit Power : 18.5 to 45 kW - U 3-phase = 230 to 600 V or 400 V (Version 1.0)
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.