Main range of productAltistart 01 product or component typeSoft starter product destinationAsynchronous motors product specific applicationSimple machine device short nameATS01 network number of phases3 phases [Us] rated supply voltage200...240 V - 10...10 % motor power kW4 kW, 3 phases at 200...240 V5.5 kW, 3 phases at 200...240 V motor power hp5 hp, 3 phases at 200...240 V7.5 hp, 3 phases at 200...240 V IcL starter rating22 A utilisation categoryAC-53B conforming to EN/IEC 60947-4-2 current consumption110 A at nominal load type of startStart with voltage ramp power dissipation in W124.5 W in transient state4.5 W at full load and at end of starting Complementary assembly styleWith heat sink function availableIntegrated bypass supply voltage limits180…264 V supply frequency50...60 Hz - 5...5 % network frequency47.5...63 Hz output voltage<= power supply voltage [Uc] control circuit voltageBuilt into the starter starting time1 s / 1005 s / 2010 s / 10Adjustable from 1 to 10 s deceleration time symbAdjustable from 1 to 10 s starting torque30...80 % of starting torque of motor connected directly on the line supply discrete input typeLogic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm discrete input voltage24...40 V discrete input logicPositive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA discrete output current2 A DC-133 A AC-15 discrete output typeOpen collector logic LO1 end of starting signalRelay outputs R1A, R1C NO discrete output voltage24 V (voltage limits: 6...30 V) open collector logic minimum switching current10 mA at 6 V DCfor relay outputs maximum switching currentRelay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive loadRelay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load display type1 LED (green)for starter powered up1 LED (yellow)for nominal voltage reached tightening torque0.5 N.m1.9…2.5 N.m electrical connection4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuitScrew connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuitScrew connector - rigid 2 0.5...1 mm² AWG 17 control circuitScrew connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuitScrew connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuitScrew connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit markingCE operating positionVertical +/- 10 degree height154 mm width45 mm depth131 mm product weight0.56 kg compatibility codeATS01N2 Motor power range AC-34…6 kW at 200…240 V 3 phases motor starter typeSoft starter Environment electromagnetic compatibilityConducted and radiated emissions level B conforming to CISPR 11Conducted and radiated emissions level B conforming to IEC 60947-4-2Damped oscillating waves level 3 conforming to IEC 61000-4-12Electrostatic discharge level 3 conforming to IEC 61000-4-2EMC immunity conforming to EN 50082-1EMC immunity conforming to EN 50082-2Harmonics conforming to IEC 1000-3-2Harmonics conforming to IEC 1000-3-4Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6Immunity to electrical transients level 4 conforming to IEC 61000-4-4Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11Voltage/current impulse level 3 conforming to IEC 61000-4-5 standardsEN/IEC 60947-4-2 product certificationsGOSTCSAC-TickULB44.1-96/ASME A17.5 for starter wired to the motor delta terminalCCC IP degree of protectionIP20 pollution degree2 conforming to EN/IEC 60947-4-2 vibration resistance1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-61.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 shock resistance15 gnfor 11 ms conforming to EN/IEC 60068-2-27 relative humidity5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 ambient air temperature for operation-10…40 °C (without derating)40…50 °C (with current derating of 2 % per °C) ambient air temperature for storage-25…70 °C conforming to EN/IEC 60947-4-2 operating altitude<= 1000 m without derating> 1000 m with current derating of 2.2 % per additional 100 m Offer Sustainability REACh Regulation EU RoHS Directive Circularity Profile Contractual warranty Warranty18 months
Documents and DownloadsLanguage
CatalogueSizeAdd to My DocumentsInstruction sheetSizeAdd to My DocumentsCADSizeAdd to My DocumentsCAD for ATS01N222LU: soft starter for asynchronous motor - ATS01 - 22 A - 200..240 V - 4..5.5 KW (Version 1.0)Soft start/soft stop unit Power : 4 to 15 kW - U 3-phase = 200 to 240 V or 380 to 415 V or 440 to 430 V (Version 1.0)CertificateSizeAdd to My DocumentsEnd of Life InformationSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.