Technical FAQs

Ask a Question

Osisense XC_XCMN211AL1 switch datasheet
XCMN211AL1 basic limit switch is not a standard one (not shown into Osisense XC catalogue). It is an adapted switch requested by an Italian OEM. It...
Osisense XC - Oxygen index of the plastic material used in the enclosure of the XCKP, XCMN, XCKT & XCKS limit switches
The plastic case of the XCKP, XCKT, XCMN and XCKS blue limit switches is a blue Valox 553, or PBT+PC GF30. It is flame classified UL94 V-0. Oxygen...
9013FSG - Meaning of the form Z22 in the 9013FSG, FRG, FHG pressure switch references
The form Z22 in the 9013FSG, FRG, FHG pressure switch references, means black cover instead of grey cover.
Can the ATV212 drive run a synchronous motor?
Issue: Can the ATV212 drive run a synchronous motor? Product Line: ATV212 Environment: All serial numbers for ATV212 Cause: N/A Resolution: Yes the...
Osisense XU_XUZCR0501AF anti fog reflector datasheet
Please find attached the datasheet of the XUZCR0501AF anti fog (or anti mist) reflector 51 x 69 mm, which is not a standard reflector.
Is the ATV630 (or ATV930) Process drive available with 1 phase input and 3 phase output?
Issue: Is the ATV630 (or ATV930) Process drive available with single phase input and 3 phase output? Product Line: Altivar 630 Altivar 930 Environment:...
What can cause and GrdF ground fault on the ATS22 soft starter?
Issue: What can cause the ATS22 softstart unit to trip on Ground Fault (GrdF)? Product Line: ATS22 Environment: All Cause: Tripping the unit Resolution:...
What causes E-17 fault on an ATV21 / ATV212 series drive?
Issue: What causes E-17 fault on an ATV21 / ATV212 series drive? Product Line: ATV21 and ATV212 series drives Environment: All models, All serial...
Can the VW3A31101 HMI be configured to toggle from local to remote mode when connected to an ATV312?
Issue: Can the VW3A31101 HMI be configured to toggle from local to remote mode when connected to an ATV312?    Product Line: ATV312, VW3A1101 keypad...
Where should I connect the SZ1RV1202 potentiometer (pot) to the ATV variable speed drives?
The potentiometer part number: SZ1RV1202 must be connected to one of the 0...10 V analog inputs on ATVxxxx range variable speed drives: ATV12 (or...
Results 1 - 10 of 100