Technical FAQs

Ask a Question

Filter results

Clear
Why do I receive an error OLN-801 in Concept?
One reason that Concept may report an error OLN-801 " Error Opening Loadable File ", is that during the upload of a project from a controller containing...
What is the maximum number of variables allowed in a Concept FBD section?
The maximum number of variables that may be used in an FBD section is 1899. If more than 1899 variables are used in a section, Concept will generate...
What does Concept error 1316 mean and how can I correct it?
Concept error 1316 is described as 'EFB Type Was Not Installed Previously'. To correct this, verify that all needed EFBs are present in the Concept\LIB...
How is a run permissive function added to an ATV61/71?
Issue: How is a run permissive function added to an ATV61/71? Product Line: Altivar 61 71 ATV61 ATV71 Environment: All models Cause: The VFD needs...
How to setup a Fault Status on the Altivar Process Drive?
Issue: How to setup a Fault Relay on the Altivar Process Drive? Product Line: Altivar Process Drive (ATV630, ATV930, ATV650, ATV950, ATV660, ATV960,...
Root element is missing error then the Scadapack workbench will crash
Problem description:  There were 3 customer programs that are having an issue with the Scadapack workbench program when you right click on the Resource1...
How can an ATV212 drive be setup to ignore a com fault and continue running at same speed before the fault?
Issue: How can the drive be setup to ignore a com fault and continue running at same speed before the fault?  Product Line: ALTIVAR 212 Environment:...
What would case the trip LED to flash on an ATS22 Softstart?
Issue: What would case the trip LED to flash on an ATS22 Softstart?  Product Line: ALTISTART 22, ATS22 Environment: All Cause: N/A Resolution: Trip...
How to program the ATV71 drive to run from local control (keypad)?
Issue: How to program the ATV71 drive to run from local control (keypad)?  Product Line: Altivar 71, ATV71 Environment: All Cause: N/A Resolution:...
ATV61/71 drive is not switching the analog references from AI1 to AI2?
Issue: Why is the ATV61/71 drive not switching the analog references from AI1 to AI2? Product Line: Altivar ATV61 and ATV71 Environment: All Cause:...
Results 1 - 10 of 100