Technical FAQs

Ask a Question

Filter results

Clear
What are the Share-UPS and Interface Expander modes of operation?
Issue What are the Share-UPS and Interface Expander modes of operation? Product Line   UPS Device Management AP9607/AP9607CB Interface Expander SmartSlot...
How do you update the M241 or M251 firmware using SoMachine Controller Assistant?
Issue How do you update the M241 or M251 firmware using SoMachine Controller Assistant? Product Line Modicon M241 PLC Modicon M251 PLC EcoStruxure...
Where to download M580 Firmware?
Issue: Where to download M580 Firmware? Product Line: M580 Resolution: The M580 Firmware can be downloaded from here: https://www.schneider-electric.ca/en/download/range/62098-Modicon%20M580%20High-end%20Controller/?docTypeGroup=88181372-Software%2FFirmware...
Why does my USB drive show up as a Modicon PLC in the Device Manager?
 Issue: USB drive does not work properly and shows up as a Modicon PLC in the Device Manager of the PC.   Product Line: Modicon PLC   Environment:...
On a Magelis XBTGT display unit equipped with a USB port, how can I install a Runtime version that is earlier than the Vijeo Designer
Symptom: In Vijeo Designer, if you try to load an earlier Runtime version onto an XBTGT, the following message is displayed: "You are trying to transfer...
Where can I download SoMove and DTM files? What is the USB to RJ45 cable required to connect SoMove to the drive using the ModBus port?
Issue: Where can I find a link for SoMove? What cable is used? Product line: Variable Frequency Drives and Soft Starts   Environment: All models,...
How to connect XPSMC via USB, using TSXCUSB485 USB converter?
XPSMC + TSXCUSB485 hardware connection XPSMC + TSXCUSB485 software rules
Can I connect a Magelis display unit directly to a Zelio module?
Itis now possible to link one of two HMI's to the Zelio Logic smart relays via the communication protocol. The communication cable for Zelio Logic...
Is it SDI-12 protocol supported in SCADAPack controllers?
The SDI-12 protocol is a master-slave protocol and SCADAPack 32 or SCADAPack 3xx series controller can be used as a master to communicate with slave...
How can I access the Unitelway driver without using the Driver Manager?
In the Windows XP explorer, launch the "Cnfutw3.exe" tool from 'C:\Windows\System32' Note:  This tool can also be found in C:\xwaydrv
Results 1 - 10 of 60