| FA32391 | How many cables per phase can be installed on Ringmaster Ringmaster C (RN2c, RE2c and RN6c)
Up to 2 cables per phase can terminated on Ringmaster C units. Special ECON cable termination kits must be used... |
| FA141957 | Can I use LED lighting with an electronic dimmer? Electronic dimmers are not compatible with any type of led lighting. |
| FA141959 | I cannot program my replacement smart receiver. Please make sure that you have the correct components.
Smart receivers will have the part references GHACR, GHAFR or GHAFRES
Smart controllers will... |
| FA141961 | do we have instructions for a CLS 110 light sensitive switch? please find a PDF for the instructions for a CLS110 |
| FA141663 | Where can I find additional XU multimode photo electric sensor set up and diagnostics information?
The XU multi mode (also known as Osiconcept , OsiSense and Osiris) photo electric sensors can be configured for 4 different modes of operation.
Multi... |
| FA142622 | Tripping curves for GB2 circuit breakers. The tripping curves for the GB2 circuit breakers are displayed below :
Extracted from the Control and protection components 2011/2012 catalogue... |
| FA142859 | Where can i find the tightening torque settings for my Square D MCB / RCBO ? Please refer to the attached table for values. |
| FA142261 | Do sphere lighting controllers need a live and a neutral supply? Sphere 5 and 8 Channel Hand and Wall Controllers are battery powered only, the various types of receivers are the only system components that are... |
| FA141812 | Can you provide wiring advice for switches, sockets etc? Unfortunatley, we are unable to provide wiring advice over the telephone. However, should you require, we can provide specific wiring diagrams and... |
| FA142903 | Where can i find the tightening torque settings for my Twinbreak Switch fuse Please refer to the attached table for values. |