| FA32391 | How many cables per phase can be installed on Ringmaster Ringmaster C (RN2c, RE2c and RN6c)
Up to 2 cables per phase can terminated on Ringmaster C units. Special ECON cable termination kits must be used... |
| FA141555 | How to check the firmware and hardware version on the Zelio Logic Smart relay?
Check the firmware on the front of the screen (LCD display) of Zelio Smart Relay.
Check the firmware on the software,... |
| FA141635 | Can I connect an SR2 or SR3 Zelio Logic Smart Relay to an HMI, separate display screen?
Yes, you can connect the SR2 or SR3 to a small HMI, this HMI comes included in a kit, starter-kit HMISTO & Zelio Logic – reference: VJDSTKSTOSR2
The... |
| FA141863 | What replaced XPSCE? What are the differences between XPSCE and the new XPSCM? XPS-CE Replaced by XPS-CM
XPSCE (old model) XPSCM (new model)
XPS-CM has 3 extra solid... |
| FA141801 | Where to get drivers for the Bluetooth adaptor VW3A8115 for Zelio Logic Smart Relay SR2/SR3/Twido/ATV? The drivers are contained in the CD, included in the Bluetooth adaptor kit accompanies, those drivers are also obtainable here.
Bluetooth adaptor... |
| FA141670 | What replaced XPSASF? What are the differences between XPSASF and the new XPSAK? XPS-ASF Replaced by XPS-AK
XPSAFS (old model) XPSAK (new model)
XPS-AK has one extra N/O... |
| FA141668 | What replaced XPSAP? What are the differences between XPSAP and the new XPSAR? XPS-AP Replaced by XPS-AR
XPSAP (old model) XPSAR (new model)
XPS-AR... |
| FA142116 | Do LC1K and LC1D have mirror contacts? Which ones are those? Yes, if those contactors have built in or using ad on auxiliary, in the following circumstances:
TESYS model K contactors :
... |
| FA142074 | What is the maximum earth fault loop impedance Zs for the Tesys U? What values are taken into consideration to calculate the Zs values? For a TN system, section 413-02-08 of BS7671 defines the maximum earth fault loop impedance based on the following condition being met:
... |
| FA142042 | Where can I locate information covering the LK3 (and LK31) switch disconnect products? The LK3 switch disconnect products (suitable for load break and isolation applications in accordance with catalogue specifications) are marketed by... |