| FA132170 | How do you read the kWh value from PM700 range of Power Meters Modbus registers ? A list of registers for the commincating variants of the PM700range are contained in appendix C of the Installation manual for the PM700.
An example... |
| FA23065 | How can I change language on the LTMCU operator control unit? The LTMCU unit is a pocket operator control unit which can be used to configure LTMR motor management controllers from the TeSys T range.
The LTMCU... |
| FA132865 | What is WSOS5 WSOS 5 (Windows Switchgear Operating System 5) is a software package that allows the remote control and monitoring of pole mounted auto reclosers... |
| FA132871 | Can I have remote operation with my RM6 Remote operation is archived by integrating a RTU (Remote Telemetry Unit) such as T200I or T200E and fitting actuators to the required functions.... |
| FA132868 | Can a recloser be controlled remotely Yes when connected to a communications network via a modem, a recloser or load break switch/sectionaliser can be controlled remotely.
For more information... |
| FA23049 | Which programming software replaces TwidoSoft? The TwidoSoft software has been replaced by the TwidoSuite programming software, part number (on DVD-ROM) is: TWDBTFU10M
The transfer cable or Bluetooth... |
| FA33142 | How many stop bits do the Momentum Modbus ports manage? Momentum processors and the 172JNN21032 communication adaptor only manage one stop bit. Any attempt to change the number of stop bits will be ignored.... |
| FA32793 | What are the function codes of the Modbus protocol used by IO Scanning in TCP-IP? The following Modbus protocol function codes are used by IO Scanning on Ethernet TCP-IP:
Read only = function code 03
Write only = function... |
| FA32789 | Which "Symbol database" file types should be used with OFS for Unity Premium PLCs? When using Aliases in OFS, pointing to a Unity Premium PLC, only two types of "Symbol database" file can be used: either user files (.STU), or project... |
| FA32678 | How can I modify the configuration of the FTB1IB16EP1 programmable modules? To modify the configuration of FTB1IB16EP1 modules from 8 inputs/8 diag to 16 inputs, write the value 1 in the 2nd output word. To return to 8 inputs/8... |