| FA148633 | Is surge protection available for the KQ distribution boards. There is surge protection available for the KQ distribution boards see pdf |
| FA27988 | Can I replace a broken toggle on an NS / NSX circuit-breaker or switch. No, the toggle on the breaker frame cannot be replaced as the toggle is integral to the breaker frame.
The breaker frame needs to be replaced.
However,... |
| FA27982 | Can I fit a CT module and a residual current module (vigi) onto the Compact NSX MCCB range. No, a CT module cannot be fitted onto a residual current module (vigi) from the Compact NSX MCCB range. |
| FA27986 | Can I connect aluminium or copper, flexible or rigid cables to the single and double terminals of the NSX 400 to 630 range. In the NSX 400 to 630 range:
Single terminals, part numbers LV432479 or LV432480, can take: aluminium or copper rigid cables with cross-section 35... |
| FA31962 | If the C60H circuit breaker is locked ON with the MGLA padlocking facility will it still trip under fault conditions. Yes, All of the miniature circuit breakers have a "trip free" mechanism which enables them to trip under fault conditions even if the handle is locked... |
| FA141635 | Can I connect an SR2 or SR3 Zelio Logic Smart Relay to an HMI, separate display screen?
Yes, you can connect the SR2 or SR3 to a small HMI, this HMI comes included in a kit, starter-kit HMISTO & Zelio Logic – reference: VJDSTKSTOSR2
The... |
| FA141801 | Where to get drivers for the Bluetooth adaptor VW3A8115 for Zelio Logic Smart Relay SR2/SR3/Twido/ATV? The drivers are contained in the CD, included in the Bluetooth adaptor kit accompanies, those drivers are also obtainable here.
Bluetooth adaptor... |
| FA142116 | Do LC1K and LC1D have mirror contacts? Which ones are those? Yes, if those contactors have built in or using ad on auxiliary, in the following circumstances:
TESYS model K contactors :
... |
| FA142042 | Where can I locate information covering the LK3 (and LK31) switch disconnect products? The LK3 switch disconnect products (suitable for load break and isolation applications in accordance with catalogue specifications) are marketed by... |
| FA142019 | Can I get the magnet or the detector of a Coded Magnetic Switch XCS for Safety, as separate component? No, the Safety coded magnetic switches have to be bought as a pair, which will include the magnet and the detector.
Note: Other variations on... |