FAQs

FAQ Search
Most Recently Published FAQs

Results 91 - 100 of 100

FAQ ID Description
FA22719Can the XPE on/off foot switches be used to perform an emergency stop function?
No, as due to their mechanical design, there is nothing to prevent an object from getting under the foot switch and preventing actuation of the contact....
FA22710What mounting tips can you give for single beam proximity detectors with the muting function connected to an XPSCM1144?
Summary of the muting function of an XPSCM Preventa module: The XPSCM Preventa module muting mechanism allows materials to be transported across...
FA22711What mounting tips can you give for single beam polarised reflex type detectors with the mute function connected to an XPSCM11
Summary of the mute function of an XPSCM Preventa module: The Preventa XPSCM module mute mechanism allows materials to be transported across the...
FA22721Why are XPE foot switches only available with quick-break contacts whereas older models were available with slow-break contacts?
For many years it was not possible to comply with the rules on positive opening using quick-break contacts. For this reason products were designed...
FA22712Simulation of a fault on one of the 2 valve flaps (dynamic monitoring) managed by an XPSPVK
The presses used for the cold working of metals must be routinely and regularly checked. This check also affects the safety function provided by...
FA22738Can I install 2 audible unit (buzzer) with different tones on an XVP range of illuminated beacons or tower lights?
No, only one audible unit can be installed on an XVP tower light, and in addition, it must be at the top of the stack. If more than one audible unit...
FA22893What are the differences between the various tripping classes of thermal overload?
There are four classes of thermal overload relay: 10A 10 20 30 These class numbers indicate the trip characteristics from cold state, and should be...
FA22740Is there an additional light diffuser available for XVB and XVD illuminated Tower Beacons
Yes, the light diffuser, part number XVBZ18 (consisting of two half-cylinders) can be placed in the illuminated lens unit so as to create a new light...
FA22714Dynamic periodic monitoring of dual body valves on an XPSPVK eccentric press
Presses used for cold working of metals must be systematically and regularly checked. This check also affects the safety function provided by the...
FA22748What material is used in and what is the surface treatment for the ZB4BZ009 mounting bases?
ZB4xx mounting bases are made of chromium plated ZnAl4 and mild sheet steel. This product is RoHS compliant (Restriction of Hazardous Products)

Results 91 - 100 of 100