|FA24980||How can I solve an OBF fault on ATV58?|
If the drive indicates the OBF fault it is caused by over braking.
This is caused when the drive's DC bus voltage exceeds the permitted voltage...
|FA24973||What is the ohmic tripping value of a PTC probe on an ATV58?|
The motor temperature is detected by PTC probes connected to the ATV58 drive via specific inputs (+10, AI3A, AI3B and COM) on extension card VW3A58201.
|FA22677||How can I use preset speeds on an ATV11?|
It is always advisable before programming a drive to do a “Factory Reset”
go to FUN menu and down to FCS
press enter then down...
|FA23007||What is the meaning of the items screen-printed on the setting selector switches of the Micrologic and STR electronic control units.|
Standard IEC 60947-2 defines the names of the selector switches.
The meanings of the screen-printed items on the selector switches of the trip units...
|FA27988||Can I replace a broken toggle on an NS / NSX circuit-breaker or switch.|
No, the toggle on the breaker frame cannot be replaced as the toggle is integral to the breaker frame.
The breaker frame needs to be replaced.
|FA24947||Can I use an ATS48 type starter to supply a slip-ring motor?|
The ATS48 could be used with Slip Ring motor, but due to the fact a Slip Ring motor is designed for high torque applications the most efficient answer...
|FA27969||How can I obtain the manufacturing date of the Compact NS or NSX circuit-breakers|
To obtain the manufacturing date of Compact NS or NSX circuit-breakers, read the screen-printed marking at the top of the front panel.
The code P07351,...
|FA163941||What is included in the LexCom Performance networking system tool kit - product code VDIR580020?|
The tool kit provides a small range of tool especially adapted, it includes:
1 x cable jacket stripper
1 x LSA punch down tool
1 x flat screwdriver...
|FA22746||How is content level detected in a transparent bottle by a photoelectric sensor?|
Sensor number XUMW1KSNLT is a thru beam sensor for the detection of liquid levels in glass and plastic containers. See attached pdf
Though not a...
|FA22764||What are the rules for parallel-connection of XS 5-wire inductive , XT capacitive and XU photoelectric detectors?|
Relevant products :
The relevant products are XS inductive and XT capacitive sensors, and XU photoelectric detectors.
When connected in parallel,...