| FA23735 | Where should I connect the SZ1RV1202 potentiometer (pot) to the ATV variable speed drives? The potentiometer part number: SZ1RV1202 must be connected to one of the 0...10 V analog inputs on ATVxxxx range variable speed drives:
ATV12... |
| FA22870 | How can Schneider Electric Soft Starts be used to run three phase motors in both direction(Forwards and Reverse) Soft Starters can not reverse the direction of the motor. To achieve reversal of the motor’s direction a set of reversing contactors must be wired... |
| FA22750 | What is the part number for a potentiometer to control Schneider Electric Altivar variable speed drives (VSDs) ? The recommended specification for potentiometers compatible across our range of drives (ATV11, ATV12, ATV31, ATV312, ATV21, ATV61 and ATV71 and the legacy... |
| FA28191 | What is the part number for the neutral pole for a 50 A VCF3GE switch ? For the 50 A VCF3GE switch, the neutral pole with early make and late break contacts (part number VZ12) is an add-on module. Caution: In the 08 online... |
| FA28005 | Can I change the contacts on the XCS safety limit switches? No, it is not possible to change the contacts on XCS limit switches as they are safety devices. There is no replacement part. |
| FA28067 | What are the degrees of protection (IP) of the Harmony XB4 and XB5 control and signaling units? The pushbuttons and LEDs are IP66 The selector switches are IP69K.
The IP rating can be improved by adding covers, which increases the protection... |
| FA28074 | What is the substitution of the GSKC product by the XPSAK module? The equivalent of the GSKC safety module used for emergency stop monitoring in accordance with standard EN954-1 category 4 is the XPSAK module.
NB: ... |
| FA28095 | What are the part numbers of the BA9S type bulbs for XB4/XB5 pushbutton controls? For Harmony XB4/XB5 22 diameter control and signalling units, whether: LED lamps, incandescent lamps, neon lamps, there are part numbers with BA9s... |
| FA28149 | Does Schneider Electric have a solid state relay offer? Schneider Electric offers a range of solid state relays.
The Schneider Electric SSR solid state relays have the following benefits over electromechanical... |
| FA24894 | Can I use a "conventional" limit switch for safety applications? Yes, it is possible to use a "conventional" limit switch for safety applications, as long as the switch is "positive action"
Definition of positive... |